P0195 Engine oil temperature sensor circuit fault
What does P0195 mean?
The engine computer saw a general fault in the engine oil temperature sensor circuit. Oil temperature is used for VVT control and, on some cars, for calculating the oil change interval. When the sensor signal is lost the ECU runs on a substitute value, which causes symptoms such as the warning light coming on.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
P0195 symptoms
- Check engine light
- Change in variable valve timing response
- Usually no obvious symptoms
P0195 causes (most to least common)
- Most common Faulty sensor
- Loose or corroded connector
- Broken wire / short circuit
- Low oil level
How do you check and fix P0195?
- Unplug the connector, check and clean the pins.
- Measure the 5 V reference, ground and signal voltage at the sensor (typical: the voltage falls as temperature rises).
- Inspect the wiring where it rubs against the engine block.
P0195 repair cost
Depending on the cause, roughly £35 – £230 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0195 mean?
P0195 means "Engine Oil Temperature Sensor Circuit Malfunction": Engine oil temperature sensor circuit fault. The engine computer saw a general fault in the engine oil temperature sensor circuit. Oil temperature is used for VVT control and, on some cars, for calculating the oil change interval. When the sensor signal is lost the ECU runs on a substitute value, which causes symptoms such as the warning light coming on.
Can you drive with P0195?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
What causes a P0195 fault?
Most common causes: faulty sensor, loose or corroded connector, broken wire / short circuit. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0195 repair cost?
Depending on the cause, it costs roughly £35 – £230 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0195 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Engine sensors codes
All engine sensors codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.