Engine sensors · Petrol and diesel

P0196 Engine oil temperature sensor range / performance problem

Standard definition: Engine Oil Temperature Sensor Range/Performance

SeverityLow
Is it safe to drive?Drivable
Estimated cost£35 – £230
Can you check it yourself?Yes, the first steps

What does P0196 mean?

The value read by the engine oil temperature sensor doesn't match the other sensors and how the engine is running. The sensor may have drifted (reading a wrong but plausible value), or there is a real problem in the system it measures. Oil temperature is used for VVT control and, on some cars, for calculating the oil change interval.

Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.

P0196 symptoms

P0196 causes (most to least common)

  1. Most common Sensor drift / contamination
  2. Low oil level
  3. A real problem in the measured system
  4. Poor connector contact

How do you check and fix P0196?

  1. In live data, compare the sensor value with the value expected under similar conditions.
  2. Clean or check the sensor; if needed, replace it with a genuine or good-quality aftermarket part.
  3. Check for a mechanical problem (leak, blockage) in the related system.

P0196 repair cost

Depending on the cause, roughly £35 – £230 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0196 mean?

P0196 means "Engine Oil Temperature Sensor Range/Performance": Engine oil temperature sensor range / performance problem. The value read by the engine oil temperature sensor doesn't match the other sensors and how the engine is running. The sensor may have drifted (reading a wrong but plausible value), or there is a real problem in the system it measures. Oil temperature is used for VVT control and, on some cars, for calculating the oil change interval.

Can you drive with P0196?

Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.

What causes a P0196 fault?

Most common causes: sensor drift / contamination, low oil level, a real problem in the measured system. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0196 repair cost?

Depending on the cause, it costs roughly £35 – £230 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0196 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Engine sensors codes

All engine sensors codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.