Cooling and oil · Petrol and diesel

P0520 Oil pressure sensor / switch circuit fault

Standard definition: Engine Oil Pressure Sensor/Switch Circuit Malfunction

SeverityHigh
Is it safe to drive?With care, short distances
Estimated cost£20 – £260
Can you check it yourself?Mechanic needed

What does P0520 mean?

The signal from the oil pressure sensor or switch isn't in the expected range. It is usually a sensor / connector fault, but take it seriously, because genuinely low oil pressure can wreck the engine within minutes.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

⚠️ If the oil light is on, don't keep the engine running; check the oil level first.

P0520 symptoms

P0520 causes (most to least common)

  1. Most common Faulty or leaking sensor / switch
  2. Connector and wiring
  3. Low oil level
  4. Genuinely low oil pressure (pump, pick-up strainer, bearings)

How do you check and fix P0520?

  1. Check the oil level straight away.
  2. Have the real oil pressure measured with a mechanical gauge.
  3. If the pressure is normal, replace the sensor.

P0520 repair cost

Depending on the cause, roughly £20 – £260 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0520 mean?

P0520 means "Engine Oil Pressure Sensor/Switch Circuit Malfunction": Oil pressure sensor / switch circuit fault. The signal from the oil pressure sensor or switch isn't in the expected range. It is usually a sensor / connector fault, but take it seriously, because genuinely low oil pressure can wreck the engine within minutes.

Can you drive with P0520?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse. If the oil light is on, don't keep the engine running; check the oil level first.

What causes a P0520 fault?

Most common causes: faulty or leaking sensor / switch, connector and wiring, low oil level. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0520 repair cost?

Depending on the cause, it costs roughly £20 – £260 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0520 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Cooling and oil codes

All cooling and oil codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.