Engine sensors · Petrol and diesel

P0198 Engine oil temperature sensor signal high

Standard definition: Engine Oil Temperature Sensor Circuit High

SeverityLow
Is it safe to drive?With care, short distances
Estimated cost£35 – £230
Can you check it yourself?Yes, the first steps

What does P0198 mean?

The engine oil temperature sensor signal is above its upper limit. It is usually a broken ground wire, the signal shorted to 5 V, or a faulty sensor. Oil temperature is used for VVT control and, on some cars, for calculating the oil change interval.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0198 symptoms

P0198 causes (most to least common)

  1. Most common Ground wire broken
  2. Signal wire shorted to 5 V
  3. Faulty sensor
  4. Connector unplugged

How do you check and fix P0198?

  1. Measure the ground wire continuity.
  2. Check the connector.
  3. Measure the sensor signal with the ignition on.

P0198 repair cost

Depending on the cause, roughly £35 – £230 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0198 mean?

P0198 means "Engine Oil Temperature Sensor Circuit High": Engine oil temperature sensor signal high. The engine oil temperature sensor signal is above its upper limit. It is usually a broken ground wire, the signal shorted to 5 V, or a faulty sensor. Oil temperature is used for VVT control and, on some cars, for calculating the oil change interval.

Can you drive with P0198?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0198 fault?

Most common causes: ground wire broken, signal wire shorted to 5 V, faulty sensor. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0198 repair cost?

Depending on the cause, it costs roughly £35 – £230 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0198 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Engine sensors codes

All engine sensors codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.