Diesel: DPF, glow plugs, high pressure · Diesel vehicles

P2002 Diesel particulate filter (DPF) efficiency below threshold (bank 1)

Standard definition: Diesel Particulate Filter Efficiency Below Threshold (Bank 1)

SeverityHigh
Is it safe to drive?With care, short distances
Estimated cost£65 – £2,600
Can you check it yourself?Mechanic needed

What does P2002 mean?

The ECU decided that the DPF isn't trapping particles as expected, or that the filter is overloaded. It is one of the most common codes on diesels used for short trips in town, because the filter needs long, high-revving drives to burn itself clean (regeneration).

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

⚠️ DPF delete (removal) is illegal and means failing the roadworthiness inspection. Cleaning and a sensor check should come first.

P2002 symptoms

P2002 causes (most to least common)

  1. Most common DPF full of soot (short-trip use)
  2. Faulty DPF differential pressure sensor or hose
  3. Ash build-up (very high mileage)
  4. Wrong engine oil (not low-ash, not "C" spec)
  5. A misfiring injector / EGR problem producing too much soot

How do you check and fix P2002?

  1. Read the DPF load and differential pressure in live data.
  2. If it is safe to do so, drive for 20–30 minutes on the motorway above 2,500 rpm (passive regeneration).
  3. Have a service (forced) regeneration done with a diagnostic tool.
  4. Check the differential pressure sensor hoses for cracks / blockage.
  5. For a full, ash-loaded filter, have a professional DPF clean done.

❌ Common mistake: Buying a new DPF straight away. In most cases a forced regeneration or a professional clean is enough.

P2002 repair cost

Depending on the cause, roughly £65 – £2,600 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P2002 mean?

P2002 means "Diesel Particulate Filter Efficiency Below Threshold (Bank 1)": Diesel particulate filter (DPF) efficiency below threshold (bank 1). The ECU decided that the DPF isn't trapping particles as expected, or that the filter is overloaded. It is one of the most common codes on diesels used for short trips in town, because the filter needs long, high-revving drives to burn itself clean (regeneration).

Can you drive with P2002?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse. DPF delete (removal) is illegal and means failing the roadworthiness inspection. Cleaning and a sensor check should come first.

What causes a P2002 fault?

Most common causes: dPF full of soot (short-trip use), faulty DPF differential pressure sensor or hose, ash build-up (very high mileage). For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P2002 repair cost?

Depending on the cause, it costs roughly £65 – £2,600 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P2002 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Diesel: DPF, glow plugs, high pressure codes

All diesel: dpf, glow plugs, high pressure codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.