Engine sensors · Petrol and diesel

P0115 Engine coolant temperature sensor circuit fault

Standard definition: Engine Coolant Temperature Circuit Malfunction

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost£20 – £200
Can you check it yourself?Yes, the first steps

What does P0115 mean?

The ECU saw a general fault in the engine coolant temperature (ECT) sensor circuit. This sensor tells the ECU how hot the engine is; cold-start enrichment, idle speed and fan control depend on it. When the sensor signal is lost, the ECU runs on a substitute value; this causes symptoms such as the fan running all the time or not at all.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

⚠️ When the ECU loses this sensor, it runs the fan constantly for safety; if you notice the fan noise, have the codes read.

P0115 symptoms

P0115 causes (most to least common)

  1. Most common Faulty sensor
  2. Loose or corroded connector
  3. Broken wire / short circuit
  4. Coolant low, sensor left in air

How do you check and fix P0115?

  1. Unplug the connector, check and clean the pins.
  2. Measure the 5 V reference, ground and signal voltage at the sensor (typical: about 0.5–1.0 V on a hot engine (90 °C)).
  3. Inspect the wiring where it rubs against the engine block.

P0115 repair cost

Depending on the cause, roughly £20 – £200 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0115 mean?

P0115 means "Engine Coolant Temperature Circuit Malfunction": Engine coolant temperature sensor circuit fault. The ECU saw a general fault in the engine coolant temperature (ECT) sensor circuit. This sensor tells the ECU how hot the engine is; cold-start enrichment, idle speed and fan control depend on it. When the sensor signal is lost, the ECU runs on a substitute value; this causes symptoms such as the fan running all the time or not at all.

Can you drive with P0115?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse. When the ECU loses this sensor, it runs the fan constantly for safety; if you notice the fan noise, have the codes read.

What causes a P0115 fault?

Most common causes: faulty sensor, loose or corroded connector, broken wire / short circuit. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0115 repair cost?

Depending on the cause, it costs roughly £20 – £200 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0115 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Engine sensors codes

All engine sensors codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.