P0109 Manifold absolute pressure (MAP) sensor circuit intermittent
What does P0109 mean?
The manifold absolute pressure (MAP) sensor signal drops out from time to time. It is usually a loose connector or a wire that loses contact with vibration. The MAP sensor measures the pressure in the intake manifold; engine load and, on turbo cars, boost pressure are calculated from it.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
P0109 symptoms
- Loss of power
- Surging idle
- Higher fuel consumption
- Limp mode on a turbo car
P0109 causes (most to least common)
- Most common Loose connector
- Broken internal wire (cutting out with vibration)
- Corroded pin
How do you check and fix P0109?
- With the engine running, gently wiggle the connector and wiring and watch in live data whether the signal drops out.
- Clean the pins and check the connector lock.
P0109 repair cost
Depending on the cause, roughly £40 – £290 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0109 mean?
P0109 means "Manifold Absolute Pressure/Barometric Pressure Circuit Intermittent": Manifold absolute pressure (MAP) sensor circuit intermittent. The manifold absolute pressure (MAP) sensor signal drops out from time to time. It is usually a loose connector or a wire that loses contact with vibration. The MAP sensor measures the pressure in the intake manifold; engine load and, on turbo cars, boost pressure are calculated from it.
Can you drive with P0109?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.
What causes a P0109 fault?
Most common causes: loose connector, broken internal wire (cutting out with vibration), corroded pin. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0109 repair cost?
Depending on the cause, it costs roughly £40 – £290 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0109 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Engine sensors codes
All engine sensors codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.