P0197 Engine oil temperature sensor signal low
What does P0197 mean?
The engine oil temperature sensor signal is below its lower limit. Usually the signal wire is shorted to ground, the sensor is faulty, or the connector is unplugged. Oil temperature is used for VVT control and, on some cars, for calculating the oil change interval.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
P0197 symptoms
- Check engine light
- Change in variable valve timing response
- Usually no obvious symptoms
P0197 causes (most to least common)
- Most common Signal wire shorted to ground
- Faulty sensor
- Connector problem
- Loss of the 5 V reference
How do you check and fix P0197?
- Measure the signal voltage with the ignition on.
- See whether the value changes when you unplug the connector.
- Look for crushed or melted wiring.
P0197 repair cost
Depending on the cause, roughly £35 – £230 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0197 mean?
P0197 means "Engine Oil Temperature Sensor Circuit Low": Engine oil temperature sensor signal low. The engine oil temperature sensor signal is below its lower limit. Usually the signal wire is shorted to ground, the sensor is faulty, or the connector is unplugged. Oil temperature is used for VVT control and, on some cars, for calculating the oil change interval.
Can you drive with P0197?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
What causes a P0197 fault?
Most common causes: signal wire shorted to ground, faulty sensor, connector problem. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0197 repair cost?
Depending on the cause, it costs roughly £35 – £230 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0197 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Engine sensors codes
All engine sensors codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.