P2135 Throttle position sensors A/B disagree
What does P2135 mean?
The two position sensors on the electronic throttle body are reading different values. It is usually a dirty throttle body, internal sensor wear or a connector problem.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
P2135 symptoms
- Limp mode
- Stalling at idle
- Delayed throttle response
P2135 causes (most to least common)
- Most common Faulty throttle body (sensor or motor)
- Throttle dirty / carbonised
- Connector and wiring
How do you check and fix P2135?
- Remove and clean the throttle body, then run an adaptation.
- Check the connector.
- If the problem continues, the throttle body is replaced.
P2135 repair cost
Depending on the cause, roughly $70 – $720 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P2135 mean?
P2135 means "Throttle/Pedal Position Sensor/Switch A/B Voltage Correlation": Throttle position sensors A/B disagree. The two position sensors on the electronic throttle body are reading different values. It is usually a dirty throttle body, internal sensor wear or a connector problem.
Can you drive with P2135?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
What causes a P2135 fault?
Most common causes: faulty throttle body (sensor or motor), throttle dirty / carbonised, connector and wiring. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P2135 repair cost?
Depending on the cause, it costs roughly $70 – $720 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P2135 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Engine sensors codes
All engine sensors codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.