Engine sensors · Petrol and diesel

P0112 Intake air temperature (IAT) sensor signal low

Standard definition: Intake Air Temperature Circuit Low

SeverityLow
Is it safe to drive?With care, short distances
Estimated cost$25 – $280
Can you check it yourself?Yes, the first steps

What does P0112 mean?

The intake air temperature (IAT) sensor signal is below the lower limit. Usually the signal wire is shorted to ground, the sensor is faulty, or the connector is unplugged. The IAT sensor measures the temperature of the air entering the engine; the fuel quantity and ignition advance are adjusted from it.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0112 symptoms

P0112 causes (most to least common)

  1. Most common Signal wire shorted to ground
  2. Faulty sensor
  3. Connector problem
  4. Loss of the 5 V reference

How do you check and fix P0112?

  1. Measure the signal voltage with the ignition on.
  2. See whether the value changes when you unplug the connector.
  3. Look for crushed or melted wiring.

P0112 repair cost

Depending on the cause, roughly $25 – $280 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0112 mean?

P0112 means "Intake Air Temperature Circuit Low": Intake air temperature (IAT) sensor signal low. The intake air temperature (IAT) sensor signal is below the lower limit. Usually the signal wire is shorted to ground, the sensor is faulty, or the connector is unplugged. The IAT sensor measures the temperature of the air entering the engine; the fuel quantity and ignition advance are adjusted from it.

Can you drive with P0112?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0112 fault?

Most common causes: signal wire shorted to ground, faulty sensor, connector problem. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0112 repair cost?

Depending on the cause, it costs roughly $25 – $280 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0112 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Engine sensors codes

All engine sensors codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.