Engine sensors · Petrol and diesel

P0116 Engine coolant temperature sensor range / performance problem

Standard definition: Engine Coolant Temperature Range/Performance

SeverityMedium
Is it safe to drive?Drivable
Estimated cost$25 – $240
Can you check it yourself?Yes, the first steps

What does P0116 mean?

The value read by the engine coolant temperature (ECT) sensor does not match the other sensors and the way the engine is running. The sensor may have drifted (reading a wrong but plausible value), or there is a real problem in the system it measures. This sensor tells the ECU how hot the engine is; cold-start enrichment, idle speed and fan control depend on it.

Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.

⚠️ When the ECU loses this sensor, it runs the fan constantly for safety; if you notice the fan noise, have the codes read.

P0116 symptoms

P0116 causes (most to least common)

  1. Most common Sensor drift / contamination
  2. Coolant low, sensor left in air
  3. A real problem in the measured system
  4. Poor connector contact

How do you check and fix P0116?

  1. In live data, compare the sensor value with the value expected under similar conditions.
  2. Clean or check the sensor; if needed, replace it with a genuine or good-quality aftermarket part.
  3. Check for a mechanical problem (leak, blockage) in the related system.

P0116 repair cost

Depending on the cause, roughly $25 – $240 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0116 mean?

P0116 means "Engine Coolant Temperature Range/Performance": Engine coolant temperature sensor range / performance problem. The value read by the engine coolant temperature (ECT) sensor does not match the other sensors and the way the engine is running. The sensor may have drifted (reading a wrong but plausible value), or there is a real problem in the system it measures. This sensor tells the ECU how hot the engine is; cold-start enrichment, idle speed and fan control depend on it.

Can you drive with P0116?

Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity. When the ECU loses this sensor, it runs the fan constantly for safety; if you notice the fan noise, have the codes read.

What causes a P0116 fault?

Most common causes: sensor drift / contamination, coolant low, sensor left in air, a real problem in the measured system. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0116 repair cost?

Depending on the cause, it costs roughly $25 – $240 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0116 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Engine sensors codes

All engine sensors codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.