Engine sensors · Petrol and diesel

P0104 Mass air flow (MAF) sensor circuit intermittent

Standard definition: Mass or Volume Air Flow Circuit Intermittent

SeverityLow
Is it safe to drive?Drivable
Estimated cost$40 – $520
Can you check it yourself?Yes, the first steps

What does P0104 mean?

The mass air flow (MAF) sensor signal drops out from time to time. It is usually a loose connector or a wire that loses contact with vibration. The MAF sensor measures how much air enters the engine; the ECU calculates the fuel to inject from it.

Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.

P0104 symptoms

P0104 causes (most to least common)

  1. Most common Loose connector
  2. Broken internal wire (cutting out with vibration)
  3. Corroded pin

How do you check and fix P0104?

  1. With the engine running, gently wiggle the connector and wiring and watch in live data whether the signal drops out.
  2. Clean the pins and check the connector lock.

P0104 repair cost

Depending on the cause, roughly $40 – $520 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0104 mean?

P0104 means "Mass or Volume Air Flow Circuit Intermittent": Mass air flow (MAF) sensor circuit intermittent. The mass air flow (MAF) sensor signal drops out from time to time. It is usually a loose connector or a wire that loses contact with vibration. The MAF sensor measures how much air enters the engine; the ECU calculates the fuel to inject from it.

Can you drive with P0104?

Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.

What causes a P0104 fault?

Most common causes: loose connector, broken internal wire (cutting out with vibration), corroded pin. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0104 repair cost?

Depending on the cause, it costs roughly $40 – $520 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0104 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Engine sensors codes

All engine sensors codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.