P0464 Fuel level sensor circuit intermittent
What does P0464 mean?
The fuel level sensor signal drops out from time to time. It is usually a loose connector or a wire that loses contact with vibration. The float-type level sensor in the tank drives the fuel gauge and, on some cars, the EVAP tests.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
P0464 symptoms
- Fuel gauge reads wrongly or erratically
- Low fuel warning light comes on wrongly
- EVAP tests can't be run
P0464 causes (most to least common)
- Most common Loose connector
- Broken internal wire (cutting out with vibration)
- Corroded pin
How do you check and fix P0464?
- With the engine running, gently wiggle the connector and wiring and watch in live data whether the signal drops out.
- Clean the pins and check the connector lock.
P0464 repair cost
Depending on the cause, roughly £50 – £360 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0464 mean?
P0464 means "Fuel Level Sensor A Circuit Intermittent": Fuel level sensor circuit intermittent. The fuel level sensor signal drops out from time to time. It is usually a loose connector or a wire that loses contact with vibration. The float-type level sensor in the tank drives the fuel gauge and, on some cars, the EVAP tests.
Can you drive with P0464?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.
What causes a P0464 fault?
Most common causes: loose connector, broken internal wire (cutting out with vibration), corroded pin. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0464 repair cost?
Depending on the cause, it costs roughly £50 – £360 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0464 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Engine sensors codes
All engine sensors codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.