Engine sensors · Petrol and diesel

P0180 Fuel temperature sensor A circuit fault

Standard definition: Fuel Temperature Sensor A Circuit Malfunction

SeverityLow
Is it safe to drive?With care, short distances
Estimated cost£25 – £260
Can you check it yourself?Yes, the first steps

What does P0180 mean?

The engine computer saw a general fault in the fuel temperature sensor circuit. Fuel temperature affects fuel density; the ECU corrects the injection quantity from it, especially on diesels. When the sensor signal is lost the ECU runs on a substitute value, which causes symptoms such as hard starting when hot.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0180 symptoms

P0180 causes (most to least common)

  1. Most common Faulty sensor
  2. Loose or corroded connector
  3. Broken wire / short circuit

How do you check and fix P0180?

  1. Unplug the connector, check and clean the pins.
  2. Measure the 5 V reference, ground and signal voltage at the sensor (typical: the voltage falls as temperature rises).
  3. Inspect the wiring where it rubs against the engine block.

P0180 repair cost

Depending on the cause, roughly £25 – £260 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0180 mean?

P0180 means "Fuel Temperature Sensor A Circuit Malfunction": Fuel temperature sensor A circuit fault. The engine computer saw a general fault in the fuel temperature sensor circuit. Fuel temperature affects fuel density; the ECU corrects the injection quantity from it, especially on diesels. When the sensor signal is lost the ECU runs on a substitute value, which causes symptoms such as hard starting when hot.

Can you drive with P0180?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0180 fault?

Most common causes: faulty sensor, loose or corroded connector, broken wire / short circuit. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0180 repair cost?

Depending on the cause, it costs roughly £25 – £260 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0180 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Engine sensors codes

All engine sensors codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.