Engine sensors · Petrol and diesel

P0199 Engine oil temperature sensor circuit intermittent

Standard definition: Engine Oil Temperature Sensor Circuit Intermittent

SeverityLow
Is it safe to drive?Drivable
Estimated cost$40 – $280
Can you check it yourself?Yes, the first steps

What does P0199 mean?

The engine oil temperature sensor signal drops out from time to time. It is usually a loose connector or a wire that loses contact with vibration. Oil temperature is used for VVT control and, on some cars, for calculating the oil change interval.

Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.

P0199 symptoms

P0199 causes (most to least common)

  1. Most common Loose connector
  2. Broken internal wire (cutting out with vibration)
  3. Corroded pin

How do you check and fix P0199?

  1. With the engine running, gently wiggle the connector and wiring and watch in live data whether the signal drops out.
  2. Clean the pins and check the connector lock.

P0199 repair cost

Depending on the cause, roughly $40 – $280 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0199 mean?

P0199 means "Engine Oil Temperature Sensor Circuit Intermittent": Engine oil temperature sensor circuit intermittent. The engine oil temperature sensor signal drops out from time to time. It is usually a loose connector or a wire that loses contact with vibration. Oil temperature is used for VVT control and, on some cars, for calculating the oil change interval.

Can you drive with P0199?

Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.

What causes a P0199 fault?

Most common causes: loose connector, broken internal wire (cutting out with vibration), corroded pin. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0199 repair cost?

Depending on the cause, it costs roughly $40 – $280 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0199 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Engine sensors codes

All engine sensors codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.