Engine sensors · Petrol and diesel

P0118 Engine coolant temperature sensor signal high

Standard definition: Engine Coolant Temperature Circuit High

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost$25 – $240
Can you check it yourself?Yes, the first steps

What does P0118 mean?

The engine coolant temperature (ECT) sensor signal is above the upper limit. It is usually a broken ground wire, the signal shorted to 5 V, or a faulty sensor. This sensor tells the ECU how hot the engine is; cold-start enrichment, idle speed and fan control depend on it.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0118 symptoms

P0118 causes (most to least common)

  1. Most common Ground wire broken
  2. Signal wire shorted to 5 V
  3. Faulty sensor
  4. Connector unplugged

How do you check and fix P0118?

  1. Measure the ground wire continuity.
  2. Check the connector.
  3. Measure the sensor signal with the ignition on.

P0118 repair cost

Depending on the cause, roughly $25 – $240 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0118 mean?

P0118 means "Engine Coolant Temperature Circuit High": Engine coolant temperature sensor signal high. The engine coolant temperature (ECT) sensor signal is above the upper limit. It is usually a broken ground wire, the signal shorted to 5 V, or a faulty sensor. This sensor tells the ECU how hot the engine is; cold-start enrichment, idle speed and fan control depend on it.

Can you drive with P0118?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0118 fault?

Most common causes: ground wire broken, signal wire shorted to 5 V, faulty sensor. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0118 repair cost?

Depending on the cause, it costs roughly $25 – $240 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0118 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Engine sensors codes

All engine sensors codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.