P0268 Cylinder 3 injector circuit high
What does P0268 mean?
Higher than expected voltage was seen in the cylinder 3 injector circuit; usually an open circuit (broken wire, loose connector) or a broken injector coil.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
P0268 symptoms
- Misfire on the affected cylinder
- Loss of power
- Check engine light
P0268 causes (most to least common)
- Most common Injector connector off / loose
- Broken wire
- Injector coil open circuit
How do you check and fix P0268?
- Check the connector and seat it properly.
- Measure the wiring continuity.
- Measure the injector resistance; if it reads infinite, the injector is faulty.
P0268 repair cost
Depending on the cause, roughly £50 – £780 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0268 mean?
P0268 means "Cylinder 3 Injector Circuit High": Cylinder 3 injector circuit high. Higher than expected voltage was seen in the cylinder 3 injector circuit; usually an open circuit (broken wire, loose connector) or a broken injector coil.
Can you drive with P0268?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
What causes a P0268 fault?
Most common causes: injector connector off / loose, broken wire, injector coil open circuit. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0268 repair cost?
Depending on the cause, it costs roughly £50 – £780 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0268 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Fuel and air mixture codes
All fuel and air mixture codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.