Fuel and air mixture · Petrol and diesel

P0170 Fuel trim malfunction (bank 1)

Standard definition: Fuel Trim Malfunction (Bank 1)

SeverityMedium
Is it safe to drive?Drivable
Estimated cost£20 – £390
Can you check it yourself?Mechanic needed

What does P0170 mean?

The fuel trim values went outside the range the ECU allows; whether lean or rich isn't specified. It usually has the same causes as P0171/P0172.

Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.

P0170 symptoms

P0170 causes (most to least common)

  1. Most common Air leak
  2. MAF fault
  3. Fuel pressure problem
  4. Faulty oxygen sensor

How do you check and fix P0170?

  1. Look at the short- and long-term fuel trims in live data (positive = lean, negative = rich).
  2. Depending on the result, follow the P0171 or P0172 checks.

P0170 repair cost

Depending on the cause, roughly £20 – £390 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0170 mean?

P0170 means "Fuel Trim Malfunction (Bank 1)": Fuel trim malfunction (bank 1). The fuel trim values went outside the range the ECU allows; whether lean or rich isn't specified. It usually has the same causes as P0171/P0172.

Can you drive with P0170?

Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.

What causes a P0170 fault?

Most common causes: air leak, mAF fault, fuel pressure problem. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0170 repair cost?

Depending on the cause, it costs roughly £20 – £390 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0170 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Fuel and air mixture codes

All fuel and air mixture codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.