Fuel and air mixture · Diesel vehicles

P0088 Fuel rail / system pressure too high

Standard definition: Fuel Rail/System Pressure – Too High

SeverityHigh
Is it safe to drive?With care, short distances
Estimated cost£100 – £1,300
Can you check it yourself?Mechanic needed

What does P0088 mean?

The pressure in the rail rose above the requested value. It usually happens when the pressure control valve or the metering valve sticks; the engine may cut power to protect itself.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0088 symptoms

P0088 causes (most to least common)

  1. Most common Rail pressure control valve (DRV) stuck
  2. Faulty metering / volume control valve
  3. Faulty pressure sensor
  4. Return line blocked / crushed

How do you check and fix P0088?

  1. Check the pressure sensor value with the ignition on and the engine off (it should be close to 0).
  2. Check the return line.
  3. Measure the valve resistance and signal.

P0088 repair cost

Depending on the cause, roughly £100 – £1,300 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0088 mean?

P0088 means "Fuel Rail/System Pressure – Too High": Fuel rail / system pressure too high. The pressure in the rail rose above the requested value. It usually happens when the pressure control valve or the metering valve sticks; the engine may cut power to protect itself.

Can you drive with P0088?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0088 fault?

Most common causes: rail pressure control valve (DRV) stuck, faulty metering / volume control valve, faulty pressure sensor. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0088 repair cost?

Depending on the cause, it costs roughly £100 – £1,300 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0088 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Fuel and air mixture codes

All fuel and air mixture codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.