P0093 Large leak detected in the fuel system
What does P0093 mean?
The ECU saw the rail pressure drop unexpectedly fast; this can mean a large fuel leak. If diesel drips onto a hot engine, there is a risk of fire.
Do not drive: Stop in a safe place and switch off the engine. Carrying on can cause serious damage.
⚠️ If you smell fuel, do not start the car; there is a risk of fire.
P0093 symptoms
- Strong smell of diesel / petrol
- Engine stalls and won't restart
- Traces of fuel under the engine
P0093 causes (most to least common)
- Most common Cracked high-pressure pipe or loose fitting
- Very high injector return (leak-off)
- Rail pressure relief valve stuck open
- Pump leak
How do you check and fix P0093?
- Do not drive the car; check above and below the engine for traces of fuel.
- Inspect the high-pressure pipes and fittings.
- Have an injector leak-off test done.
P0093 repair cost
Depending on the cause, roughly £50 – £1,650 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0093 mean?
P0093 means "Fuel System Large Leak Detected": Large leak detected in the fuel system. The ECU saw the rail pressure drop unexpectedly fast; this can mean a large fuel leak. If diesel drips onto a hot engine, there is a risk of fire.
Can you drive with P0093?
Do not drive. Stop in a safe place and switch off the engine. Carrying on can cause serious damage. If you smell fuel, do not start the car; there is a risk of fire.
What causes a P0093 fault?
Most common causes: cracked high-pressure pipe or loose fitting, very high injector return (leak-off), rail pressure relief valve stuck open. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0093 repair cost?
Depending on the cause, it costs roughly £50 – £1,650 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0093 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Fuel and air mixture codes
All fuel and air mixture codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.