Fuel and air mixture · Petrol and diesel

P0192 Fuel rail pressure sensor signal low

Standard definition: Fuel Rail Pressure Sensor Circuit Low

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost£65 – £520
Can you check it yourself?Mechanic needed

What does P0192 mean?

The sensor signal is very low; usually the signal wire is shorted to ground or the sensor has failed.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0192 symptoms

P0192 causes (most to least common)

  1. Most common Faulty sensor
  2. Short circuit
  3. Connector

How do you check and fix P0192?

  1. Measure the signal and the 5 V reference.
  2. Look for chafing on the wiring.

P0192 repair cost

Depending on the cause, roughly £65 – £520 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0192 mean?

P0192 means "Fuel Rail Pressure Sensor Circuit Low": Fuel rail pressure sensor signal low. The sensor signal is very low; usually the signal wire is shorted to ground or the sensor has failed.

Can you drive with P0192?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0192 fault?

Most common causes: faulty sensor, short circuit, connector. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0192 repair cost?

Depending on the cause, it costs roughly £65 – £520 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0192 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Fuel and air mixture codes

All fuel and air mixture codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.