Fuel and air mixture · Petrol and diesel

P0230 Fuel pump primary circuit fault

Standard definition: Fuel Pump Primary Circuit Malfunction

SeverityHigh
Is it safe to drive?Do not drive
Estimated cost£25 – £590
Can you check it yourself?Mechanic needed

What does P0230 mean?

There is a fault in the relay / control circuit that drives the fuel pump. If the pump doesn't run, the engine won't run.

Do not drive: Stop in a safe place and switch off the engine. Carrying on can cause serious damage.

P0230 symptoms

P0230 causes (most to least common)

  1. Most common Fuel pump relay
  2. Fuse
  3. Pump control module
  4. Wiring / connector
  5. Faulty pump motor

How do you check and fix P0230?

  1. Switch on the ignition and listen for a 2–3 second hum from the tank.
  2. Check the fuse and relay.
  3. Measure the voltage at the pump connector.

P0230 repair cost

Depending on the cause, roughly £25 – £590 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0230 mean?

P0230 means "Fuel Pump Primary Circuit Malfunction": Fuel pump primary circuit fault. There is a fault in the relay / control circuit that drives the fuel pump. If the pump doesn't run, the engine won't run.

Can you drive with P0230?

Do not drive. Stop in a safe place and switch off the engine. Carrying on can cause serious damage.

What causes a P0230 fault?

Most common causes: fuel pump relay, fuse, pump control module. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0230 repair cost?

Depending on the cause, it costs roughly £25 – £590 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0230 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Fuel and air mixture codes

All fuel and air mixture codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.