Diesel: DPF, glow plugs, high pressure · Diesel vehicles

P2455 DPF differential pressure sensor signal high

Standard definition: Diesel Particulate Filter Pressure Sensor A Circuit High

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost£35 – £290
Can you check it yourself?Yes, the first steps

What does P2455 mean?

There is a problem with the sensor that measures the pressure difference between the DPF inlet and outlet (signal high). The ECU uses this sensor to work out how full the filter is; if it reads wrongly, it regenerates needlessly or not at all.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P2455 symptoms

P2455 causes (most to least common)

  1. Most common The silicone / metal hose to the sensor cracked, disconnected or blocked with soot (most common)
  2. Faulty sensor
  3. Hoses fitted the wrong way round
  4. Connector

How do you check and fix P2455?

  1. Trace the sensor hoses; look for cracks or blockages and clear them by blowing through if needed.
  2. With the engine off, the differential pressure should be ~0.
  3. Watch whether the value rises at idle and with revs.

P2455 repair cost

Depending on the cause, roughly £35 – £290 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P2455 mean?

P2455 means "Diesel Particulate Filter Pressure Sensor A Circuit High": DPF differential pressure sensor signal high. There is a problem with the sensor that measures the pressure difference between the DPF inlet and outlet (signal high). The ECU uses this sensor to work out how full the filter is; if it reads wrongly, it regenerates needlessly or not at all.

Can you drive with P2455?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P2455 fault?

Most common causes: the silicone / metal hose to the sensor cracked, disconnected or blocked with soot (most common), faulty sensor, hoses fitted the wrong way round. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P2455 repair cost?

Depending on the cause, it costs roughly £35 – £290 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P2455 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Diesel: DPF, glow plugs, high pressure codes

All diesel: dpf, glow plugs, high pressure codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.