P0380 Glow plug / heater circuit A fault
What does P0380 mean?
There is a fault in the circuit that feeds the glow plugs (relay / control unit or the plugs themselves). Glow plugs let a cold diesel engine start.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
⚠️ A glow plug breaking during removal is expensive to fix; have it done by a competent mechanic.
P0380 symptoms
- Hard starting or no start in cold weather
- White smoke and shaking on first start
- Glow plug light flashing
P0380 causes (most to least common)
- Most common One or more glow plugs burnt out
- Faulty glow plug relay / control unit
- Loose glow plug bus bars / connectors
- Fuse
How do you check and fix P0380?
- Measure the resistance of each plug (most are 0.5–2 Ω); one that reads infinite has burnt out.
- Check the glow plug relay.
- Glow plugs can snap during removal; remove them with the engine warm and at the correct torque.
P0380 repair cost
Depending on the cause, roughly £50 – £590 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0380 mean?
P0380 means "Glow Plug/Heater Circuit "A" Malfunction": Glow plug / heater circuit A fault. There is a fault in the circuit that feeds the glow plugs (relay / control unit or the plugs themselves). Glow plugs let a cold diesel engine start.
Can you drive with P0380?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity. A glow plug breaking during removal is expensive to fix; have it done by a competent mechanic.
What causes a P0380 fault?
Most common causes: one or more glow plugs burnt out, faulty glow plug relay / control unit, loose glow plug bus bars / connectors. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0380 repair cost?
Depending on the cause, it costs roughly £50 – £590 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0380 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Diesel: DPF, glow plugs, high pressure codes
All diesel: dpf, glow plugs, high pressure codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.