Diesel: DPF, glow plugs, high pressure · Diesel vehicles

P0683 Communication fault between the glow plug module and the ECU

Standard definition: Glow Plug Control Module to PCM Communication Circuit

SeverityLow
Is it safe to drive?Drivable
Estimated cost£60 – £460
Can you check it yourself?Mechanic needed

What does P0683 mean?

There is a problem on the diagnostic communication line between the glow plug control module and the ECU.

Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.

P0683 symptoms

P0683 causes (most to least common)

  1. Most common Faulty control module
  2. Communication wire

How do you check and fix P0683?

  1. Check the module connector and wiring.

P0683 repair cost

Depending on the cause, roughly £60 – £460 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0683 mean?

P0683 means "Glow Plug Control Module to PCM Communication Circuit": Communication fault between the glow plug module and the ECU. There is a problem on the diagnostic communication line between the glow plug control module and the ECU.

Can you drive with P0683?

Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.

What causes a P0683 fault?

Most common causes: faulty control module, communication wire. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0683 repair cost?

Depending on the cause, it costs roughly £60 – £460 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0683 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Diesel: DPF, glow plugs, high pressure codes

All diesel: dpf, glow plugs, high pressure codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.