Diesel: DPF, glow plugs, high pressure · Diesel vehicles

P242F Ash build-up in the DPF

Standard definition: Diesel Particulate Filter Restriction – Ash Accumulation

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost£200 – £2,600
Can you check it yourself?Mechanic needed

What does P242F mean?

The amount of unburnable ash in the DPF has reached its limit. Ash doesn't burn off during regeneration; the filter has to be cleaned or replaced. It usually appears at around 150,000–250,000 km.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P242F symptoms

P242F causes (most to least common)

  1. Most common High mileage
  2. Unsuitable (high-ash) engine oil
  3. Oil burning

How do you check and fix P242F?

  1. Have a professional DPF clean done.
  2. Use the correct (C spec, low-ash) oil.
  3. Reset the ash value in the ECU after cleaning / replacement.

P242F repair cost

Depending on the cause, roughly £200 – £2,600 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P242F mean?

P242F means "Diesel Particulate Filter Restriction – Ash Accumulation": Ash build-up in the DPF. The amount of unburnable ash in the DPF has reached its limit. Ash doesn't burn off during regeneration; the filter has to be cleaned or replaced. It usually appears at around 150,000–250,000 km.

Can you drive with P242F?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P242F fault?

Most common causes: high mileage, unsuitable (high-ash) engine oil, oil burning. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P242F repair cost?

Depending on the cause, it costs roughly £200 – £2,600 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P242F code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Diesel: DPF, glow plugs, high pressure codes

All diesel: dpf, glow plugs, high pressure codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.