P0672 Cylinder 2 glow plug circuit fault
What does P0672 mean?
The cylinder 2 glow plug or its circuit is faulty. Usually the plug has burnt out.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
P0672 symptoms
- Hard starting in the cold
- Shaking and white smoke on first start
- Glow plug light
P0672 causes (most to least common)
- Most common Cylinder 2 glow plug burnt out
- Glow plug connector / bus bar loose
- Faulty glow plug module output
How do you check and fix P0672?
- Measure the plug resistance.
- Check the connector.
- Glow plugs don't usually have to be replaced as a set; only the faulty one can be replaced.
P0672 repair cost
Depending on the cause, roughly £45 – £260 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0672 mean?
P0672 means "Cylinder 2 Glow Plug Circuit": Cylinder 2 glow plug circuit fault. The cylinder 2 glow plug or its circuit is faulty. Usually the plug has burnt out.
Can you drive with P0672?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.
What causes a P0672 fault?
Most common causes: cylinder 2 glow plug burnt out, glow plug connector / bus bar loose, faulty glow plug module output. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0672 repair cost?
Depending on the cause, it costs roughly £45 – £260 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0672 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Diesel: DPF, glow plugs, high pressure codes
All diesel: dpf, glow plugs, high pressure codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.