Camshaft, crankshaft and variable valve timing (VVT) · Petrol and diesel

P0338 Crankshaft position sensor A signal high

Standard definition: Crankshaft Position Sensor A Circuit High

SeverityHigh
Is it safe to drive?With care, short distances
Estimated cost£35 – £290
Can you check it yourself?Yes, the first steps

What does P0338 mean?

The crankshaft position (CKP) sensor signal is above its upper limit. It is usually a broken ground wire, the signal shorted to 5 V, or a faulty sensor. The crank sensor reports engine speed and piston position; without its signal the engine won't run.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0338 symptoms

P0338 causes (most to least common)

  1. Most common Ground wire broken
  2. Signal wire shorted to 5 V
  3. Faulty sensor
  4. Connector unplugged

How do you check and fix P0338?

  1. Measure the ground wire continuity.
  2. Check the connector.
  3. Measure the sensor signal with the ignition on.

P0338 repair cost

Depending on the cause, roughly £35 – £290 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0338 mean?

P0338 means "Crankshaft Position Sensor A Circuit High": Crankshaft position sensor A signal high. The crankshaft position (CKP) sensor signal is above its upper limit. It is usually a broken ground wire, the signal shorted to 5 V, or a faulty sensor. The crank sensor reports engine speed and piston position; without its signal the engine won't run.

Can you drive with P0338?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0338 fault?

Most common causes: ground wire broken, signal wire shorted to 5 V, faulty sensor. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0338 repair cost?

Depending on the cause, it costs roughly £35 – £290 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0338 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Camshaft, crankshaft and variable valve timing (VVT) codes

All camshaft, crankshaft and variable valve timing (vvt) codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.