P0013 Camshaft B (exhaust) timing (VVT) solenoid circuit fault (bank 1)
What does P0013 mean?
There is a fault in the electrical circuit of the VVT solenoid (oil control valve) that adjusts the timing of the bank 1 B (exhaust) camshaft.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
P0013 symptoms
- Rough idle
- Loss of power, especially in the mid-range
- Higher fuel consumption
- Check engine light
P0013 causes (most to least common)
- Most common Faulty VVT solenoid
- Connector / wiring
- Blocked solenoid screen (together with the circuit code)
How do you check and fix P0013?
- Check the solenoid connector.
- Measure the solenoid resistance (usually 6–12 Ω).
- Remove the solenoid and check its screen.
P0013 repair cost
Depending on the cause, roughly £50 – £390 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0013 mean?
P0013 means ""B" Camshaft Position Actuator Circuit (Exhaust/Right/Rear) Bank 1": Camshaft B (exhaust) timing (VVT) solenoid circuit fault (bank 1). There is a fault in the electrical circuit of the VVT solenoid (oil control valve) that adjusts the timing of the bank 1 B (exhaust) camshaft.
Can you drive with P0013?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.
What causes a P0013 fault?
Most common causes: faulty VVT solenoid, connector / wiring, blocked solenoid screen (together with the circuit code). For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0013 repair cost?
Depending on the cause, it costs roughly £50 – £390 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0013 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Camshaft, crankshaft and variable valve timing (VVT) codes
All camshaft, crankshaft and variable valve timing (vvt) codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.