P0017 Crankshaft–camshaft (B) position correlation (bank 1)
What does P0017 mean?
The ECU could not see the expected relationship between the crankshaft and the bank 1 B camshaft positions. This can be a sign of a serious problem such as a stretched timing chain or a belt that has jumped a tooth.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
⚠️ If the timing chain/belt breaks, the engine is seriously damaged; avoid long trips while this code is present.
P0017 symptoms
- Hard starting, long cranking
- Loss of power
- Chain noise (rattle) when cold
- Misfire
P0017 causes (most to least common)
- Most common Stretched timing chain (most common on chain engines)
- Timing belt has jumped a tooth
- Faulty tensioner or guide rail
- Faulty VVT gear
- Faulty crankshaft or camshaft sensor
- Timing set installed incorrectly
How do you check and fix P0017?
- Listen for chain noise on the first start with a cold engine.
- Check the crank–cam deviation (angle) values in live data.
- If the timing belt/chain was changed recently, have the timing marks checked.
P0017 repair cost
Depending on the cause, roughly £65 – £1,950 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0017 mean?
P0017 means "Crankshaft Position – Camshaft Position Correlation (Bank 1 Sensor B)": Crankshaft–camshaft (B) position correlation (bank 1). The ECU could not see the expected relationship between the crankshaft and the bank 1 B camshaft positions. This can be a sign of a serious problem such as a stretched timing chain or a belt that has jumped a tooth.
Can you drive with P0017?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse. If the timing chain/belt breaks, the engine is seriously damaged; avoid long trips while this code is present.
What causes a P0017 fault?
Most common causes: stretched timing chain (most common on chain engines), timing belt has jumped a tooth, faulty tensioner or guide rail. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0017 repair cost?
Depending on the cause, it costs roughly £65 – £1,950 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0017 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Camshaft, crankshaft and variable valve timing (VVT) codes
All camshaft, crankshaft and variable valve timing (vvt) codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.