P0024 Camshaft B (exhaust) timing over-advanced / performance (bank 2)
What does P0024 mean?
The bank 2 B (exhaust) camshaft cannot reach the angle the ECU wants, or is too far advanced. The variable valve timing system runs on engine oil, so the oil level and quality are very important.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
P0024 symptoms
- Shaking at idle
- Loss of power
- Rattle on cold start
- Check engine light
P0024 causes (most to least common)
- Most common Engine oil low, old or of the wrong viscosity
- VVT solenoid stuck / screen blocked
- Faulty VVT gear (cam phaser)
- Stretched timing chain
How do you check and fix P0024?
- First check the oil level and the date of the last oil change; if needed, change it with the correct viscosity.
- Clean the solenoid screen.
- Compare the requested and actual camshaft angle in live data.
- Check the crank–cam deviation values for chain stretch.
❌ Common mistake: Replacing the VVT gear without changing the oil. On cars with old oil, an oil change often fixes the problem.
P0024 repair cost
Depending on the cause, roughly £35 – £1,150 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0024 mean?
P0024 means ""B" Camshaft Position – Timing Over-Advanced or System Performance (Exhaust/Right/Rear) Bank 2": Camshaft B (exhaust) timing over-advanced / performance (bank 2). The bank 2 B (exhaust) camshaft cannot reach the angle the ECU wants, or is too far advanced. The variable valve timing system runs on engine oil, so the oil level and quality are very important.
Can you drive with P0024?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
What causes a P0024 fault?
Most common causes: engine oil low, old or of the wrong viscosity, vVT solenoid stuck / screen blocked, faulty VVT gear (cam phaser). For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0024 repair cost?
Depending on the cause, it costs roughly £35 – £1,150 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0024 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Camshaft, crankshaft and variable valve timing (VVT) codes
All camshaft, crankshaft and variable valve timing (vvt) codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.