P2099 Post-catalyst fuel trim too rich (bank 2)
What does P2099 mean?
The fine adjustment based on the downstream oxygen sensor has hit its limit; the downstream sensor constantly sees a rich mixture. An exhaust leak before the catalytic converter, the upstream sensor reading wrongly or loss of converter efficiency are common causes.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
P2099 symptoms
- Usually no symptoms while driving
- Check engine light
- Emissions problem at the inspection
P2099 causes (most to least common)
- Most common Exhaust manifold / flange leak (between the upstream sensor and the converter)
- Upstream oxygen sensor aged
- Low converter efficiency
- A genuinely rich mixture (air leak or injector)
How do you check and fix P2099?
- With the engine cold, listen for a leak in the exhaust system and look for soot marks.
- Compare the upstream and downstream sensor signals in live data.
- If there are mixture codes such as P0172, fix those first.
P2099 repair cost
Depending on the cause, roughly £35 – £590 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P2099 mean?
P2099 means "Post Catalyst Fuel Trim System Too Rich Bank 2": Post-catalyst fuel trim too rich (bank 2). The fine adjustment based on the downstream oxygen sensor has hit its limit; the downstream sensor constantly sees a rich mixture. An exhaust leak before the catalytic converter, the upstream sensor reading wrongly or loss of converter efficiency are common causes.
Can you drive with P2099?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.
What causes a P2099 fault?
Most common causes: exhaust manifold / flange leak (between the upstream sensor and the converter), upstream oxygen sensor aged, low converter efficiency. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P2099 repair cost?
Depending on the cause, it costs roughly £35 – £590 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P2099 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Emissions: catalytic converter, oxygen sensors, EVAP codes
All emissions: catalytic converter, oxygen sensors, evap codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.