Emissions: catalytic converter, oxygen sensors, EVAP · Petrol and diesel

P0038 Oxygen sensor heater control circuit high (bank 1 sensor 2, downstream of the catalytic converter (rear))

Standard definition: HO2S Heater Control Circuit High (Bank 1 Sensor 2)

SeverityLow
Is it safe to drive?Drivable
Estimated cost£60 – £360
Can you check it yourself?Yes, the first steps

What does P0038 mean?

There is a problem in the circuit that controls the heater of the bank 1 sensor 2 (downstream of the catalytic converter (rear)) oxygen sensor (control circuit high). If the heater does not work, the sensor comes online late on a cold engine; fuel consumption and emissions go up.

Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.

P0038 symptoms

P0038 causes (most to least common)

  1. Most common Heater circuit open (broken)
  2. Sensor heater burnt out
  3. Connector unplugged

How do you check and fix P0038?

  1. Check the fuse.
  2. Measure the heater resistance and the supply voltage.
  3. Check whether the wiring touches the exhaust anywhere.

P0038 repair cost

Depending on the cause, roughly £60 – £360 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0038 mean?

P0038 means "HO2S Heater Control Circuit High (Bank 1 Sensor 2)": Oxygen sensor heater control circuit high (bank 1 sensor 2, downstream of the catalytic converter (rear)). There is a problem in the circuit that controls the heater of the bank 1 sensor 2 (downstream of the catalytic converter (rear)) oxygen sensor (control circuit high). If the heater does not work, the sensor comes online late on a cold engine; fuel consumption and emissions go up.

Can you drive with P0038?

Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.

What causes a P0038 fault?

Most common causes: heater circuit open (broken), sensor heater burnt out, connector unplugged. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0038 repair cost?

Depending on the cause, it costs roughly £60 – £360 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0038 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Emissions: catalytic converter, oxygen sensors, EVAP codes

P0030Oxygen sensor heater control circuit fault (bank 1 sensor 1, upstream of the catalytic converter (front))P0031Oxygen sensor heater control circuit low (bank 1 sensor 1, upstream of the catalytic converter (front))P0032Oxygen sensor heater control circuit high (bank 1 sensor 1, upstream of the catalytic converter (front))P0036Oxygen sensor heater control circuit fault (bank 1 sensor 2, downstream of the catalytic converter (rear))P0037Oxygen sensor heater control circuit low (bank 1 sensor 2, downstream of the catalytic converter (rear))P0050Oxygen sensor heater control circuit fault (bank 2 sensor 1, upstream of the catalytic converter (front))P0051Oxygen sensor heater control circuit low (bank 2 sensor 1, upstream of the catalytic converter (front))P0052Oxygen sensor heater control circuit high (bank 2 sensor 1, upstream of the catalytic converter (front))P0056Oxygen sensor heater control circuit fault (bank 2 sensor 2, downstream of the catalytic converter (rear))P0057Oxygen sensor heater control circuit low (bank 2 sensor 2, downstream of the catalytic converter (rear))P0058Oxygen sensor heater control circuit high (bank 2 sensor 2, downstream of the catalytic converter (rear))P0130Oxygen sensor circuit fault (bank 1 sensor 1, upstream of the catalytic converter (front))P0131Oxygen sensor signal low (bank 1 sensor 1, upstream of the catalytic converter (front))P0132Oxygen sensor signal high (bank 1 sensor 1, upstream of the catalytic converter (front))P0133Oxygen sensor slow response (bank 1 sensor 1, upstream of the catalytic converter (front))P0134No activity from the oxygen sensor (bank 1 sensor 1, upstream of the catalytic converter (front))P0135Oxygen sensor heater circuit fault (bank 1 sensor 1, upstream of the catalytic converter (front))P0136Oxygen sensor circuit fault (bank 1 sensor 2, downstream of the catalytic converter (rear))

All emissions: catalytic converter, oxygen sensors, evap codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.