P0130 Oxygen sensor circuit fault (bank 1 sensor 1, upstream of the catalytic converter (front))
What does P0130 mean?
There is a fault in the circuit of the bank 1 sensor 1 oxygen (lambda) sensor, upstream of the catalytic converter (front). The upstream sensor measures whether the mixture is rich or lean; the ECU constantly corrects the fuel quantity from it.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
P0130 symptoms
- Higher fuel consumption
- Check engine light
- Risk of failing the emissions test
- Slightly rough idle
P0130 causes (most to least common)
- Most common Sensor aged / faulty
- Corroded connector (exhaust heat)
- Wire touched the exhaust and melted
- Exhaust leak before the sensor
How do you check and fix P0130?
- Inspect the connector and wiring where they touch the exhaust pipe.
- Watch how the sensor voltage moves in live data.
- Use a special socket and a warm engine to remove the sensor; take care not to strip the thread.
P0130 repair cost
Depending on the cause, roughly £60 – £360 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0130 mean?
P0130 means "O2 Sensor Circuit Malfunction (Bank 1 Sensor 1)": Oxygen sensor circuit fault (bank 1 sensor 1, upstream of the catalytic converter (front)). There is a fault in the circuit of the bank 1 sensor 1 oxygen (lambda) sensor, upstream of the catalytic converter (front). The upstream sensor measures whether the mixture is rich or lean; the ECU constantly corrects the fuel quantity from it.
Can you drive with P0130?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.
What causes a P0130 fault?
Most common causes: sensor aged / faulty, corroded connector (exhaust heat), wire touched the exhaust and melted. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0130 repair cost?
Depending on the cause, it costs roughly £60 – £360 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0130 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Emissions: catalytic converter, oxygen sensors, EVAP codes
All emissions: catalytic converter, oxygen sensors, evap codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.