P0133 Oxygen sensor slow response (bank 1 sensor 1, upstream of the catalytic converter (front))
What does P0133 mean?
The bank 1 sensor 1 oxygen sensor, upstream of the catalytic converter (front), responds slowly to rich–lean changes. It usually shows that the sensor is ageing (100,000–150,000 km). The upstream sensor measures whether the mixture is rich or lean; the ECU constantly corrects the fuel quantity from it.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
P0133 symptoms
- Higher fuel consumption
- Check engine light
- Risk of failing the emissions test
- Slightly rough idle
P0133 causes (most to least common)
- Most common Sensor ageing
- Soot / oil build-up on the sensor tip
- Exhaust leak
How do you check and fix P0133?
- In live data, check whether the upstream sensor switches between 0.1 and 0.9 V several times a second at idle.
- If the mileage is high, replace the sensor.
P0133 repair cost
Depending on the cause, roughly £60 – £330 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0133 mean?
P0133 means "O2 Sensor Circuit Slow Response (Bank 1 Sensor 1)": Oxygen sensor slow response (bank 1 sensor 1, upstream of the catalytic converter (front)). The bank 1 sensor 1 oxygen sensor, upstream of the catalytic converter (front), responds slowly to rich–lean changes. It usually shows that the sensor is ageing (100,000–150,000 km). The upstream sensor measures whether the mixture is rich or lean; the ECU constantly corrects the fuel quantity from it.
Can you drive with P0133?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.
What causes a P0133 fault?
Most common causes: sensor ageing, soot / oil build-up on the sensor tip, exhaust leak. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0133 repair cost?
Depending on the cause, it costs roughly £60 – £330 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0133 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Emissions: catalytic converter, oxygen sensors, EVAP codes
All emissions: catalytic converter, oxygen sensors, evap codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.