P0443 EVAP purge valve circuit fault
What does P0443 mean?
There is a fault in the electrical circuit of the canister purge valve. Instead of releasing petrol vapour from the tank into the air, the EVAP system collects it in a charcoal canister and burns it in the engine.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
⚠️ Not closing the fuel cap properly after refuelling is the most common cause of this code; close it and the code may clear by itself after a few days of driving.
P0443 symptoms
- Check engine light
- Slight smell of petrol
- Hard starting after refuelling (with some codes)
- Usually no symptoms while driving
P0443 causes (most to least common)
- Most common Faulty valve coil
- Connector / wiring
- Fuse
How do you check and fix P0443?
- Check the fuel cap first: tighten it until it clicks and inspect its seal.
- Visually check the canister and its hoses.
- For a definite diagnosis, have a smoke (EVAP) test done.
P0443 repair cost
Depending on the cause, roughly £10 – £290 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0443 mean?
P0443 means "Evaporative Emission Control System Purge Control Valve Circuit": EVAP purge valve circuit fault. There is a fault in the electrical circuit of the canister purge valve. Instead of releasing petrol vapour from the tank into the air, the EVAP system collects it in a charcoal canister and burns it in the engine.
Can you drive with P0443?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity. Not closing the fuel cap properly after refuelling is the most common cause of this code; close it and the code may clear by itself after a few days of driving.
What causes a P0443 fault?
Most common causes: faulty valve coil, connector / wiring, fuse. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0443 repair cost?
Depending on the cause, it costs roughly £10 – £290 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0443 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Emissions: catalytic converter, oxygen sensors, EVAP codes
All emissions: catalytic converter, oxygen sensors, evap codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.