Emissions: catalytic converter, oxygen sensors, EVAP · Petrol and diesel

P0431 Pre-catalyst (warm-up) efficiency low (bank 2)

Standard definition: Warm Up Catalyst Efficiency Below Threshold (Bank 2)

SeverityMedium
Is it safe to drive?Drivable
Estimated cost£130 – £2,600
Can you check it yourself?Mechanic needed

What does P0431 mean?

The bank 2 warm-up catalyst (the small converter close to the manifold) isn't working efficiently enough.

Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.

P0431 symptoms

P0431 causes (most to least common)

  1. Most common Converter ageing
  2. Faulty downstream sensor
  3. Exhaust leak
  4. History of misfires

How do you check and fix P0431?

  1. Follow the P0420/P0430 check steps.

P0431 repair cost

Depending on the cause, roughly £130 – £2,600 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0431 mean?

P0431 means "Warm Up Catalyst Efficiency Below Threshold (Bank 2)": Pre-catalyst (warm-up) efficiency low (bank 2). The bank 2 warm-up catalyst (the small converter close to the manifold) isn't working efficiently enough.

Can you drive with P0431?

Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.

What causes a P0431 fault?

Most common causes: converter ageing, faulty downstream sensor, exhaust leak. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0431 repair cost?

Depending on the cause, it costs roughly £130 – £2,600 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0431 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Emissions: catalytic converter, oxygen sensors, EVAP codes

P0030Oxygen sensor heater control circuit fault (bank 1 sensor 1, upstream of the catalytic converter (front))P0031Oxygen sensor heater control circuit low (bank 1 sensor 1, upstream of the catalytic converter (front))P0032Oxygen sensor heater control circuit high (bank 1 sensor 1, upstream of the catalytic converter (front))P0036Oxygen sensor heater control circuit fault (bank 1 sensor 2, downstream of the catalytic converter (rear))P0037Oxygen sensor heater control circuit low (bank 1 sensor 2, downstream of the catalytic converter (rear))P0038Oxygen sensor heater control circuit high (bank 1 sensor 2, downstream of the catalytic converter (rear))P0050Oxygen sensor heater control circuit fault (bank 2 sensor 1, upstream of the catalytic converter (front))P0051Oxygen sensor heater control circuit low (bank 2 sensor 1, upstream of the catalytic converter (front))P0052Oxygen sensor heater control circuit high (bank 2 sensor 1, upstream of the catalytic converter (front))P0056Oxygen sensor heater control circuit fault (bank 2 sensor 2, downstream of the catalytic converter (rear))P0057Oxygen sensor heater control circuit low (bank 2 sensor 2, downstream of the catalytic converter (rear))P0058Oxygen sensor heater control circuit high (bank 2 sensor 2, downstream of the catalytic converter (rear))P0130Oxygen sensor circuit fault (bank 1 sensor 1, upstream of the catalytic converter (front))P0131Oxygen sensor signal low (bank 1 sensor 1, upstream of the catalytic converter (front))P0132Oxygen sensor signal high (bank 1 sensor 1, upstream of the catalytic converter (front))P0133Oxygen sensor slow response (bank 1 sensor 1, upstream of the catalytic converter (front))P0134No activity from the oxygen sensor (bank 1 sensor 1, upstream of the catalytic converter (front))P0135Oxygen sensor heater circuit fault (bank 1 sensor 1, upstream of the catalytic converter (front))

All emissions: catalytic converter, oxygen sensors, evap codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.