P0234 Turbo boost pressure too high (overboost)
What does P0234 mean?
Boost pressure rose above the desired value. The ECU cuts power to protect the engine. It is usually the wastegate or VNT vanes sticking in the closed position.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
P0234 symptoms
- Sudden loss of power (especially when accelerating)
- Limp mode
- Check engine light
P0234 causes (most to least common)
- Most common VNT vanes / wastegate sticking
- Faulty boost control solenoid
- Pressure sensor reading wrongly
- Vacuum hose connected wrongly
How do you check and fix P0234?
- Watch boost pressure in live data.
- Check that the actuator arm moves freely.
- Check the pressure sensor.
P0234 repair cost
Depending on the cause, roughly £50 – £1,950 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0234 mean?
P0234 means "Turbocharger/Supercharger Overboost Condition": Turbo boost pressure too high (overboost). Boost pressure rose above the desired value. The ECU cuts power to protect the engine. It is usually the wastegate or VNT vanes sticking in the closed position.
Can you drive with P0234?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
What causes a P0234 fault?
Most common causes: vNT vanes / wastegate sticking, faulty boost control solenoid, pressure sensor reading wrongly. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0234 repair cost?
Depending on the cause, it costs roughly £50 – £1,950 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0234 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Turbo and boost pressure codes
All turbo and boost pressure codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.