Turbo and boost pressure · Petrol and diesel

P0045 Turbo boost control solenoid A circuit fault

Standard definition: Turbo/Super Charger Boost Control "A" Circuit/Open

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost£60 – £980
Can you check it yourself?Mechanic needed

What does P0045 mean?

There is an open circuit / fault in the circuit of the control solenoid or electric actuator that manages turbo pressure.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0045 symptoms

P0045 causes (most to least common)

  1. Most common Faulty solenoid / actuator
  2. Connector and wiring
  3. Faulty electric actuator motor

How do you check and fix P0045?

  1. Check the connector.
  2. Measure the solenoid resistance.
  3. Run an actuator test with a diagnostic tool.

P0045 repair cost

Depending on the cause, roughly £60 – £980 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0045 mean?

P0045 means "Turbo/Super Charger Boost Control "A" Circuit/Open": Turbo boost control solenoid A circuit fault. There is an open circuit / fault in the circuit of the control solenoid or electric actuator that manages turbo pressure.

Can you drive with P0045?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0045 fault?

Most common causes: faulty solenoid / actuator, connector and wiring, faulty electric actuator motor. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0045 repair cost?

Depending on the cause, it costs roughly £60 – £980 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0045 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Turbo and boost pressure codes

All turbo and boost pressure codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.