Turbo and boost pressure · Petrol and diesel

P0047 Turbo boost control A circuit low

Standard definition: Turbo/Super Charger Boost Control "A" Circuit Low

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost£50 – £590
Can you check it yourself?Mechanic needed

What does P0047 mean?

Low voltage was seen in the turbo pressure control circuit.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0047 symptoms

P0047 causes (most to least common)

  1. Most common Short circuit or open circuit
  2. Faulty solenoid
  3. Connector

How do you check and fix P0047?

  1. Check the wiring and the connector.
  2. Measure the solenoid resistance.

P0047 repair cost

Depending on the cause, roughly £50 – £590 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0047 mean?

P0047 means "Turbo/Super Charger Boost Control "A" Circuit Low": Turbo boost control A circuit low. Low voltage was seen in the turbo pressure control circuit.

Can you drive with P0047?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0047 fault?

Most common causes: short circuit or open circuit, faulty solenoid, connector. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0047 repair cost?

Depending on the cause, it costs roughly £50 – £590 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0047 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Turbo and boost pressure codes

All turbo and boost pressure codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.