P0146 No activity from the oxygen sensor (bank 1 sensor 3, rearmost (3rd))
What does P0146 mean?
The signal of the bank 1 sensor 3 oxygen sensor, rearmost (3rd), stays fixed and doesn't change at all. The sensor may be dead, its heater may not be working or the signal wire may be broken. The downstream sensor monitors whether the catalytic converter is working; it has little effect on mixture control.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
P0146 symptoms
- Usually no symptoms while driving
- Check engine light
- Risk of failing the emissions test
P0146 causes (most to least common)
- Most common Faulty sensor
- Heater circuit fault (sensor not warming up)
- Signal wire broken
How do you check and fix P0146?
- Check whether there is also a heater code (P0135, P0141 and so on).
- Watch the signal voltage.
- Check the connector and wiring.
P0146 repair cost
Depending on the cause, roughly £60 – £360 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0146 mean?
P0146 means "O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 3)": No activity from the oxygen sensor (bank 1 sensor 3, rearmost (3rd)). The signal of the bank 1 sensor 3 oxygen sensor, rearmost (3rd), stays fixed and doesn't change at all. The sensor may be dead, its heater may not be working or the signal wire may be broken. The downstream sensor monitors whether the catalytic converter is working; it has little effect on mixture control.
Can you drive with P0146?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.
What causes a P0146 fault?
Most common causes: faulty sensor, heater circuit fault (sensor not warming up), signal wire broken. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0146 repair cost?
Depending on the cause, it costs roughly £60 – £360 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0146 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Emissions: catalytic converter, oxygen sensors, EVAP codes
All emissions: catalytic converter, oxygen sensors, evap codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.