P0138 Oxygen sensor signal high (bank 1 sensor 2, downstream of the catalytic converter (rear))
What does P0138 mean?
The bank 1 sensor 2 oxygen sensor, downstream of the catalytic converter (rear), shows a constantly high voltage (rich). The downstream sensor monitors whether the catalytic converter is working; it has little effect on mixture control.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
P0138 symptoms
- Usually no symptoms while driving
- Check engine light
- Risk of failing the emissions test
P0138 causes (most to least common)
- Most common Sensor fault or contamination (if oil or coolant is being burnt)
- Genuinely rich mixture
- Signal wire shorted to voltage
How do you check and fix P0138?
- Look at the fuel trim values.
- Check whether the engine is burning oil or coolant; it contaminates the sensor.
- Inspect the wiring.
P0138 repair cost
Depending on the cause, roughly £60 – £360 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0138 mean?
P0138 means "O2 Sensor Circuit High Voltage (Bank 1 Sensor 2)": Oxygen sensor signal high (bank 1 sensor 2, downstream of the catalytic converter (rear)). The bank 1 sensor 2 oxygen sensor, downstream of the catalytic converter (rear), shows a constantly high voltage (rich). The downstream sensor monitors whether the catalytic converter is working; it has little effect on mixture control.
Can you drive with P0138?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.
What causes a P0138 fault?
Most common causes: sensor fault or contamination (if oil or coolant is being burnt), genuinely rich mixture, signal wire shorted to voltage. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0138 repair cost?
Depending on the cause, it costs roughly £60 – £360 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0138 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Emissions: catalytic converter, oxygen sensors, EVAP codes
All emissions: catalytic converter, oxygen sensors, evap codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.