Turbo and boost pressure · Diesel vehicles

P2563 Turbo control position sensor range / performance

Standard definition: Turbocharger Boost Control Position Sensor Range/Performance

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost$120 – $2,000
Can you check it yourself?Mechanic needed

What does P2563 mean?

The turbo vane (VNT) position sensor doesn't see the expected movement. It is common on electric turbo actuators (many diesels); the vanes may be stuck or the actuator may be faulty.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P2563 symptoms

P2563 causes (most to least common)

  1. Most common VNT vanes stuck with soot
  2. Electric actuator gear / sensor fault
  3. Actuator calibration lost

How do you check and fix P2563?

  1. Run an actuator test with a diagnostic tool.
  2. Have the vanes checked for free movement.
  3. Calibration is essential when the actuator is replaced.

P2563 repair cost

Depending on the cause, roughly $120 – $2,000 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P2563 mean?

P2563 means "Turbocharger Boost Control Position Sensor Range/Performance": Turbo control position sensor range / performance. The turbo vane (VNT) position sensor doesn't see the expected movement. It is common on electric turbo actuators (many diesels); the vanes may be stuck or the actuator may be faulty.

Can you drive with P2563?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P2563 fault?

Most common causes: vNT vanes stuck with soot, electric actuator gear / sensor fault, actuator calibration lost. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P2563 repair cost?

Depending on the cause, it costs roughly $120 – $2,000 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P2563 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Turbo and boost pressure codes

All turbo and boost pressure codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.