Turbo and boost pressure · Petrol vehicles

P0033 Turbo bypass valve control circuit fault

Standard definition: Turbo/Super Charger Bypass Valve Control Circuit

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost$70 – $480
Can you check it yourself?Mechanic needed

What does P0033 mean?

There is a fault in the circuit of the bypass (diverter/blow-off) valve that releases turbo pressure when you lift off the throttle. It is common on turbocharged petrol engines.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0033 symptoms

P0033 causes (most to least common)

  1. Most common Torn bypass valve diaphragm (most common)
  2. Valve connector
  3. Wiring

How do you check and fix P0033?

  1. Remove the valve and check its diaphragm.
  2. Measure the resistance.

P0033 repair cost

Depending on the cause, roughly $70 – $480 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0033 mean?

P0033 means "Turbo/Super Charger Bypass Valve Control Circuit": Turbo bypass valve control circuit fault. There is a fault in the circuit of the bypass (diverter/blow-off) valve that releases turbo pressure when you lift off the throttle. It is common on turbocharged petrol engines.

Can you drive with P0033?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0033 fault?

Most common causes: torn bypass valve diaphragm (most common), valve connector, wiring. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0033 repair cost?

Depending on the cause, it costs roughly $70 – $480 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0033 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Turbo and boost pressure codes

All turbo and boost pressure codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.