Turbo and boost pressure · Petrol and diesel

P0236 Turbo boost pressure sensor A range / performance problem

Standard definition: Turbocharger Boost Sensor A Range/Performance

SeverityHigh
Is it safe to drive?Drivable
Estimated cost$55 – $400
Can you check it yourself?Yes, the first steps

What does P0236 mean?

The value read by the boost pressure sensor doesn't match the other sensors and how the engine is running. The sensor may have drifted (reading a wrong but plausible value), or there is a real problem in the system it measures. The boost pressure sensor measures the pressure the turbo produces; the ECU controls the wastegate / VNT from it.

Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.

P0236 symptoms

P0236 causes (most to least common)

  1. Most common Sensor drift / contamination
  2. Sensor coated with soot / oil
  3. Leak in an intercooler hose
  4. A real problem in the measured system
  5. Poor connector contact

How do you check and fix P0236?

  1. In live data, compare the sensor value with the value expected under similar conditions.
  2. Clean or check the sensor; if needed, replace it with a genuine or good-quality aftermarket part.
  3. Check for a mechanical problem (leak, blockage) in the related system.

P0236 repair cost

Depending on the cause, roughly $55 – $400 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0236 mean?

P0236 means "Turbocharger Boost Sensor A Range/Performance": Turbo boost pressure sensor A range / performance problem. The value read by the boost pressure sensor doesn't match the other sensors and how the engine is running. The sensor may have drifted (reading a wrong but plausible value), or there is a real problem in the system it measures. The boost pressure sensor measures the pressure the turbo produces; the ECU controls the wastegate / VNT from it.

Can you drive with P0236?

Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.

What causes a P0236 fault?

Most common causes: sensor drift / contamination, sensor coated with soot / oil, leak in an intercooler hose. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0236 repair cost?

Depending on the cause, it costs roughly $55 – $400 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0236 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Turbo and boost pressure codes

All turbo and boost pressure codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.