P0235 Turbo boost pressure sensor A circuit fault
What does P0235 mean?
The engine computer saw a general fault in the boost pressure sensor circuit. The boost pressure sensor measures the pressure the turbo produces; the ECU controls the wastegate / VNT from it. When the sensor signal is lost the ECU runs on a substitute value, which causes symptoms such as loss of power and limp mode.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
P0235 symptoms
- Loss of power, limp mode
- No boost at all
- Black smoke
P0235 causes (most to least common)
- Most common Faulty sensor
- Loose or corroded connector
- Broken wire / short circuit
- Sensor coated with soot / oil
- Leak in an intercooler hose
How do you check and fix P0235?
- Unplug the connector, check and clean the pins.
- Measure the 5 V reference, ground and signal voltage at the sensor (typical: ~atmospheric pressure with the ignition on and the engine off).
- Inspect the wiring where it rubs against the engine block.
P0235 repair cost
Depending on the cause, roughly $55 – $400 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0235 mean?
P0235 means "Turbocharger Boost Sensor A Circuit Malfunction": Turbo boost pressure sensor A circuit fault. The engine computer saw a general fault in the boost pressure sensor circuit. The boost pressure sensor measures the pressure the turbo produces; the ECU controls the wastegate / VNT from it. When the sensor signal is lost the ECU runs on a substitute value, which causes symptoms such as loss of power and limp mode.
Can you drive with P0235?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
What causes a P0235 fault?
Most common causes: faulty sensor, loose or corroded connector, broken wire / short circuit. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0235 repair cost?
Depending on the cause, it costs roughly $55 – $400 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0235 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Turbo and boost pressure codes
All turbo and boost pressure codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.