Turbo and boost pressure · Petrol and diesel

P0238 Turbo boost pressure sensor A signal high

Standard definition: Turbocharger Boost Sensor A Circuit High

SeverityHigh
Is it safe to drive?With care, short distances
Estimated cost$55 – $400
Can you check it yourself?Yes, the first steps

What does P0238 mean?

The boost pressure sensor signal is above its upper limit. It is usually a broken ground wire, the signal shorted to 5 V, or a faulty sensor. The boost pressure sensor measures the pressure the turbo produces; the ECU controls the wastegate / VNT from it.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0238 symptoms

P0238 causes (most to least common)

  1. Most common Ground wire broken
  2. Signal wire shorted to 5 V
  3. Faulty sensor
  4. Connector unplugged

How do you check and fix P0238?

  1. Measure the ground wire continuity.
  2. Check the connector.
  3. Measure the sensor signal with the ignition on.

P0238 repair cost

Depending on the cause, roughly $55 – $400 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0238 mean?

P0238 means "Turbocharger Boost Sensor A Circuit High": Turbo boost pressure sensor A signal high. The boost pressure sensor signal is above its upper limit. It is usually a broken ground wire, the signal shorted to 5 V, or a faulty sensor. The boost pressure sensor measures the pressure the turbo produces; the ECU controls the wastegate / VNT from it.

Can you drive with P0238?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0238 fault?

Most common causes: ground wire broken, signal wire shorted to 5 V, faulty sensor. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0238 repair cost?

Depending on the cause, it costs roughly $55 – $400 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0238 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Turbo and boost pressure codes

All turbo and boost pressure codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.