Fuel and air mixture · Petrol and diesel

P0264 Cylinder 2 injector circuit low

Standard definition: Cylinder 2 Injector Circuit Low

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost$65 – $960
Can you check it yourself?Mechanic needed

What does P0264 mean?

Lower than expected voltage was seen in the cylinder 2 injector circuit; usually a short to ground or a faulty injector coil.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0264 symptoms

P0264 causes (most to least common)

  1. Most common Injector wire touching ground
  2. Short-circuited injector coil
  3. Faulty connector

How do you check and fix P0264?

  1. Inspect the wiring where it rubs on the engine.
  2. Measure the injector resistance.
  3. Clean the connector and check that it is tight.

P0264 repair cost

Depending on the cause, roughly $65 – $960 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0264 mean?

P0264 means "Cylinder 2 Injector Circuit Low": Cylinder 2 injector circuit low. Lower than expected voltage was seen in the cylinder 2 injector circuit; usually a short to ground or a faulty injector coil.

Can you drive with P0264?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0264 fault?

Most common causes: injector wire touching ground, short-circuited injector coil, faulty connector. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0264 repair cost?

Depending on the cause, it costs roughly $65 – $960 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0264 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Fuel and air mixture codes

All fuel and air mixture codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.