Fuel and air mixture · Petrol and diesel

P0190 Fuel rail pressure sensor circuit fault

Standard definition: Fuel Rail Pressure Sensor Circuit Malfunction

SeverityHigh
Is it safe to drive?With care, short distances
Estimated cost$95 – $720
Can you check it yourself?Mechanic needed

What does P0190 mean?

The rail pressure sensor signal is outside the expected range. Because the ECU can't know the real pressure, the engine may go into limp mode.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0190 symptoms

P0190 causes (most to least common)

  1. Most common Faulty sensor
  2. Corroded connector
  3. Wiring damage
  4. Short circuit in the 5 V reference supply

How do you check and fix P0190?

  1. Check and clean the connector.
  2. Measure whether the sensor has its 5 V reference and ground.
  3. Read the pressure value with the ignition on and the engine off: a high value means a sensor fault.

P0190 repair cost

Depending on the cause, roughly $95 – $720 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0190 mean?

P0190 means "Fuel Rail Pressure Sensor Circuit Malfunction": Fuel rail pressure sensor circuit fault. The rail pressure sensor signal is outside the expected range. Because the ECU can't know the real pressure, the engine may go into limp mode.

Can you drive with P0190?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0190 fault?

Most common causes: faulty sensor, corroded connector, wiring damage. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0190 repair cost?

Depending on the cause, it costs roughly $95 – $720 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0190 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Fuel and air mixture codes

All fuel and air mixture codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.