P0202 Cylinder 2 injector circuit fault
What does P0202 mean?
The engine computer detected an open or short circuit in the cylinder 2 injector circuit. The injector coil may have burnt out, its connector may have come loose or its wiring may be damaged. Because this cylinder can't get fuel, a misfire usually comes with it.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
⚠️ After replacing a diesel common rail injector, the injector code (IMA/IQA) must be programmed into the ECU.
P0202 symptoms
- Misfire on the affected cylinder
- Shaking at idle
- Loss of power and a smell of fuel
- Check engine light
P0202 causes (most to least common)
- Most common Faulty cylinder 2 injector coil
- Poor contact / corrosion at the injector connector
- Break or short in the wiring
- Faulty injector driver in the ECU (rare)
How do you check and fix P0202?
- Check the injector connector by unplugging and refitting it.
- Measure the injector resistance: usually 11–16 Ω for high-impedance petrol injectors.
- Swap the injector with a neighbouring cylinder and see whether the code moves (diesels may need coding).
P0202 repair cost
Depending on the cause, roughly $120 – $1,100 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0202 mean?
P0202 means "Injector Circuit Malfunction – Cylinder 2": Cylinder 2 injector circuit fault. The engine computer detected an open or short circuit in the cylinder 2 injector circuit. The injector coil may have burnt out, its connector may have come loose or its wiring may be damaged. Because this cylinder can't get fuel, a misfire usually comes with it.
Can you drive with P0202?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse. After replacing a diesel common rail injector, the injector code (IMA/IQA) must be programmed into the ECU.
What causes a P0202 fault?
Most common causes: faulty cylinder 2 injector coil, poor contact / corrosion at the injector connector, break or short in the wiring. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0202 repair cost?
Depending on the cause, it costs roughly $120 – $1,100 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0202 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Fuel and air mixture codes
All fuel and air mixture codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.